KTI Networks KS-324F Bedienungsanleitung

Installation Guide 24-port 10/100 Fast Ethernet Switch with 1 Fiber Connection Model Name: KS-324F

5. LEDs Conditions Definition 5.1 LEDs Defined The LEDs provide useful information about the switch and the status of all individual ports. LED S

6. Configure from Console 6.1 Hardware Setting for Console Before using the console connection to configure the switch, please make sure that you h

disable the backpressure function for half duplex. If it is enable, it can prevent packets lost in half duplex mode. But it will also reject pac

You can configure VLAN groups from this function. Because every port must belong to some VLAN, the removed port from VLAN will be assigned to Group

A. Product Specifications Access Method CSMA/CD, 10 Mbps or 100 Mbps Standards Conformance IEEE 802.3 10BASE-T, IEEE 802.3u 100BASETX/FX Commu

B. Cable Specification Two different types of cable could be used on this 24port Switch: l Straight through cable l Cross-over cable l Fiber Optic

C. Compliances EMI Certification FCC Class A Certification (USA) Warning: This equipment generates, uses, and can radiate radio frequency energy a

D. Warranty We warrant to the original owner that the product delivered in this package will be free from defects in material and workmanship for

We make no warranties with respect to this documentation and disclaim any implied warranties of merchantability, quality, or fitness for any particu

Contents 1. Introduction 1.1 Package Contents 2. Where to Place the 24port Switch 3. Configure The Network Connection 3.1 Connecting Devic

1. Introduction This 24port Switch is a 24-port 10/100Mbps Fast Ethernet switch. This switch supports the advanced features for current switch de

2. Where To Place the 24port Switch This 24port Switch can be placed on a flat surface (your desk, shelf or table). Place the 24port Switch at a l

3. Configure the Network Connection 3.1 Connecting Devices to the 24port Switch [ Connection Guidelines: ] l Use Category 3 or 5 twisted-pair Eth

3.3 Application A switch can be used to overcome the hub to hub connectivity limitations as well as improve overall network performance. Switches

4. For 100BaseFX Connection 4.1 Adding 100BaseFX Module This 24port switch has a module port for 100BaseFX connection extension. You can add a 100