KTI Networks KFS-2621 Bedienungsanleitung

-1- KFS-2621Web Smart 24-Port 10/100 Fast Ethernet Switch with 2 Gigabit Combo Ports User,s ManualDOC.091229

-10- 1.3 LED Indicators LED Color FunctionPower Green Power status Mngt Green Management status LINK/Act. ( Port 1-24) Green Link & activity

-11- Compliance IEEE 802.3z 1000Base-SX/LX (mini-GBIC) Connectors SFP for optional SFP type fiber transceivers Configuration Auto/Forced, 1000Mbps,

-12- MechanicalDimension (base) 295 x 160 x 43 mm (WxDxH) Housing Enclosed metal Mounting Desktop mounting, 19” rack mounting EnvironmentalOperating

-13- 2. Installation 2.1 Unpacking The product package contains: The switch unit z One AC power cord (Models with AC power) z One 19” rack mounting ki

-14- 2.3 Mounting the Switch Desktop Mounting The switch can be mounted on a desktop or shelf. Make sure that there is proper heat dissipation from an

-15- 3. Turn the power to the switch on.

-16- 2.4 AC Power Supply If the purchased switch is with AC power input, one AC power cord which meets the specification of your country of origin was

-17- 2.6 Reset Button The reset button is used to perform a reset to the switch. It is not used in normal cases and can be used for diagnostic purpose

-18- 3. Making Connections and Configuring IP Address 3.1 Making UTP Connections The 10/100 and 10/100/1000 RJ-45 copper ports support the following c

-19- 3.2 Making Fiber Connection The SFP slot must be installed with an SFP fiber transceiver for making fiber connection. Your switch may come with s

-2- (C) 2009 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any di

-20- Connecting Fiber Cables LC connectors are commonly equipped on most SFP transceiver modules. Identify TX and RX connector before making cable con

-21- 3.3 LED Indication 10/100 Copper Port LEDs Combo Ports LEDs LED Function State Interpretation

-22- P25 & P26LINK/Act Port link status ON P25 & P26 copper port link is established. (No traffic) (Green) BLINK

-23- 4. Web Management 4.1 Abbreviation Ingress Port: Ingress port is the input port on which a packet is received.

-24- 4.2 Web Interface The switch features an http server which can serve the management requests coming from any web browser software over TCP/IP net

-25- System Configuration is displayed after a successful login. 4.5 Main Management Menu

-26- ConfigurationSystem Configuration Switch information, system and IP related settings Port Configuration Port link status, port operation mode

-27- 4.6 System Configuration

-28- Configuration Description MAC Address The MAC address factory configur

-29- 4.7 Port Configuration

-3- The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved.TRADEMARKSEthernet is a re

-30- Configuration Function Auto-Negotiation Enable – enable auto-negotiatio

-31- 4.8 Port Mirroring Configuration Description Dest Port The selected de

-32- 4.9 Bandwidth Control

-33- Configuration Description Port No. The selected destination ports are

-34- 4.10 Broadcast Storm Control Configuration Description Threshold Broad

-35- 4.11 VLAN Mode Current VLAN mode: Port Based Current VLAN mode: Tag Based

-36- Configuration Description [Change VLAN mode] Click to change VLAN mode

-37- 4. Warning Message displayed when changing Tag-based VLAN mode to Port-based VLAN mode 4.12 VLAN Member (Port-based)

-38-

-39- 4.13 VLAN Member (Tag-based) Configuration Description VLAN No. Index

-4- Table of Contents 1. Introduction...

-40- Remark:1. In Tag-based VLAN, a received packet is forwarded to egress ports based on the rules below: Packet type received on an ingress port Fo

-41- Note:For the Tag-based mode, the ingress port of a received packet must be the member port of the matched VLAN. Otherwise, the packet is dropped.

-42- 4.14 Multi to 1 VLAN Setting Configuration Description Joint port Sele

-43- 4.15 Important Notes for VLAN Configuration Some considerations should be checked in configuring VLAN settings: 1. Switch VLAN Mode selectionIt

-44- 4.16 QoS Priority Mode Configuration Description Mode QoS service poli

-45- 4.17 Priority Classification - Port, 802.1p, IP/DS Based Configuration Description

-46- The classification rule is: Bit[15:13] Priority field in TCI data 000 ~ 011: low priority 100 ~111: high priority IP/DS v – s

-47- 4.18 Priority Classification – TCP/UDP Port Based Configuration Description

-48- High –The matched packet is classified as high priority. User_Defined_x User defined port number a, b, c, d Port Number Specify the port number

-49- 4.19 MAC Address Binding Configuration Description Port No. The port f

-5- 4.12 VLAN Member (Port-based) ... 374.13 VLAN Member (Tag-based)...

-50- [Apply] Click to apply the configuration. Note:1. As the MAC address binding function of a port is enabled,

-51- 4.20 TCP/UDP Filter

-52- Configuration Description Function Enable Enable – enable TCP/UDP filt

-53- 4.21 STP Bridge Settings Configuration Description STP Mode Disable –

-54- Status Description Bridge ID “Priority:MAC address” ID of current STP

-55- Configuration Description Port No. Select a port number for configurat

-56- Status Description Port No. Port RPC Path cost of the p Priority Port

-57- 4.23 Link Aggregation Configuration Description System Priority Determ

-58- aggregated into an LACP link aggregate. LACP operation key value: 1 ~ 65535Time Out LACP option: Long Time Out, Short Time OutActivity LACP op

-59- 4.24 Miscellaneous Settings Configuration Description Packet Aging Time

-6- 1. Introduction The KFS-2621 is a managed Fast Ethernet switch which is featured with the following switched ports and advantages in a 19” rack mo

-60- Remark:1. A packet is dropped if the time it stays in output queue is more than the configured Aging time. “Disable” setting forces a packet neve

-61- 4.25 Port Counter

-62- Selection Description Counter Mode Selection Select a counter to displ

-63- 4.26 Backup/Recovery This menu is used to store (backup) the all of current switch configuration to a computer. The Recovery is used to use a bac

-64- 4.28 Restore Default This menu is used to restore all settings of the switch unit with factory default values. Note:Current IP address settings

-65- As confirmed, the existing firmware is erased and a message is displayed as follows: Specify the new firmware and proceed to upload new firmware.

-66- 4.30 Logout If no user action in around 5 minutes, a notice is displayed as follows: If no user action around 10 minutes after the notice, the we

-67- Appendix. Factory Default Settings System ConfigurationPassword 123 Confirm Password 123 Name SWITCH2621 Contact Null Location Null IP Address

-68- VLAN Mode Port Based VLAN Tag Based VLAN Tagging “Don't care” tagging for all ports VLAN Member SettingPort Based VLAN Members of each por

-69- STP Bridge SettingsSTP Mode Disable Bridge Priority 32768 Hello Time 2 Max Age 20 Forward Delay 15 STP

-7- For advanced application, the switch is featured with powerful Quality of Service (QoS) function which can classify the priority for received netw

-70- Miscellaneous SettingsPacket Aging Time in Queue Disable VLAN Striding Disable IGMP Snooping Disable VLAN Uplink SettingUplink1 Clear Uplink2

-8- 1.1 Features z Provide 24 10/100Mbps Fast Ethernet ports & 2 Gigabit combo ports z All copper ports support auto-negotiation and auto-MDI/MDI-

-9- 1.2 Product Panels The following figure illustrates the front panel and rear panel of the switch: Front panel Rear panel –AC power model Rear pane