Kti-networks KF223TX Bedienungsanleitung PDF herunterladen (Seite 11)

100 Mbps Connection

For 100BASE-TX Fast Ethernet networks, the adapter supports Cat-

egory 5 UTP cabling. To establish a valid 100 Mbps connection, the

cable must be connected to a 100BASE-TX hub.

1. Make sure that the plug on the cable is wired appropriately for a

standard 100BASE-TX adapter.

2. Align the RJ-45 plug on the end of the UTP cable with the notch

on the adapter's connector and insert it into the adapter connec-

tor as shown in Figure 2-4.

Figure 2-4 Connecting 100BASE-TX Cable

Note: The UTP wire pairs and configuration for 100BASE-TX cable

are identical to those for 10BASE-T cable when used with Category

5 UTP cable. The straight through connection should be made from

the adapter through the cable and connectors to the hub. Refer to

Appendix A.1 for RJ-45 connector pin assignments.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Keine Kommentare

Kti-networks KF223TX Bedienungsanleitung Seite 11