KTI Networks KGS-2421 Bedienungsanleitung Seite 88

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 120
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 87
guest_voice : Guest Voice to support a separate limited feature-set voice
service for guest users and visitors with their own IP Telephony
handsets and other similar appliances supporting interactive voice
services.
guest_voice_signaling : Guest Voice Signaling (conditional) for use in network
topologies that require a different policy for the guest voice
signaling than for the guest voice media.
softphone_voice : Softphone Voice for use by softphone applications on typical data
centric devices, such as PCs or laptops. This class of endpoints
frequently does not support multiple VLANs, if at all, and are
typically configured to use an untagged VLAN or a single tagged
data specific VLAN.
video_conferencing : Video Conferencing for use by dedicated Video Conferencing
equipment and other similar appliances supporting real-time
interactive video/audio services.
streaming_video : Streaming Video for use by broadcast or multicast based video
content distribution and other similar applications supporting
streaming video services that require specific network policy
treatment. Video applications relying on TCP with buffering would
not be an intended use of this application type.
video_signaling : Video Signaling (conditional) for use in network topologies that
require a separate policy for the video signaling than for the video
media.
tagged : The device is using tagged frames.
Unragged : The device is using untagged frames.
<vlan_id> : VLAN id
<l2_priority> : This field may specify one of eight priority levels (0 through 7), as
defined by IEEE 802.1D-2004 [3].
<dscp> : This field shall contain the DSCP value to be used to provide
Diffserv node behavior for the specified application type as defined
in IETF RFC 2474 [5]. This 6 bit field may contain one of 64 code
point values (0 through 63). A value of 0 represents use of the
default DSCP value as defined in RFC 2475.
14.6 port policies
LLDPMED > port policies help
Description:
Set or show LLDP-MED port policies.
Seitenansicht 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare