KTI Networks Switch KGD-600 Bedienungsanleitung PDF herunterladen (Seite 41)

-41-

4.7 Quality of Service

QoS Configuration Description

Port Port number

802.1p 802.1p priority classification

Enable - set to enable this classification to the port for priority-tagged and

VLAN-tagged packets

Disable - 802.1p classification is not applied to the port

DSCP DSCP classification

Enable - set to enable DSCP classification to the port for IP packets

Disable - DSCP classification is not applied to the port

Port Priority Port default priority class, it is used as a port-based QoS mode when

802.1p and DSCP classifications are disabled. It is also used as default

priority class for the received packet when both 802.1p and DSCP classifi-

cation failed in classification.

Class 3 ~ Class 0 - priority class

[802.1p Mapping] Click to configure 802.1p mapping tables.

[DSCP Mapping] Click to configure DSCP mapping table.

[Service Policy] Click to configure per port egress service policy mode.

[Apply] Click to apply the configuration change

[Refresh] Click to refresh current configuration

Note:

802.1p classification is superior over DSCP classification if both are enabled. That means if a

received packet is classified successfully in 802.1p classification, the classified priority class is

used directly for the packet and the result of DSCP classification is ignored.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 52 53

Keine Kommentare

KTI Networks Switch KGD-600 Bedienungsanleitung Seite 41